Remedial shoeing for pedal bone rotation: support, breakover and review

By Mark Humphrey AWCF, Master Farrier and Liveryman of the Worshipful Company of Farriers. Published October 2026.

In short: For pedal bone rotation, remedial shoeing aims to spread load, move breakover back and review often, always on the vet's findings. Four anonymised cases show how.

What a farrier looks at in remedial shoeing

The vet diagnoses. The farrier's job is to turn that diagnosis into a shoeing plan for each foot. Four cases from my own work this year show the same principles: support the foot, control breakover, and review often.

1. Spread the load: heart bars and sole support

In a horse with pedal bone rotation in all four feet, I used 3rd Millennium aluminium heart bars in front, with SHU GLU dental impression material and gauze moulded under the bar. On the hind feet I used a full sole pad with the same material. Read the case.

2. Control breakover: rockered toes and shorter toes

Breakover is where the foot leaves the ground. Rockering the toe of a hind shoe shortens it. For a large horse with more than 7 degrees of rotation on the worst foot, shortening the toe to move breakover back was one of the options I discussed with the vet. Read the case.

3. Protect while the foot recovers

A retracted sole needs time to grow down. For a horse on box rest whose owner wanted him to stay barefoot, I compared glue-on pads, glue-in soles, cast shoes and clogs, and chose a Sound Horse aluminium glue-on shoe with a SHU GLU-filled sole. Read the case.

4. Review often and keep the trim cycle short

A barefoot horse had gone five weeks between trims. I trimmed to the radiographs, applied Moreaid squish pads, and moved him back to a three-weekly cycle. I also advised boots that can be modified to keep breakover short. Read the case.

Frequently asked questions

What does a farrier do for pedal bone rotation?

The farrier works with the vet's findings and radiographs to support the foot and reduce leverage. In my cases that has meant heart bar shoes, sole support with dental impression material, a rockered or shortened toe to move breakover back, and pads.

Why does breakover matter in remedial shoeing?

Breakover is the point where the foot leaves the ground. Moving it back reduces leverage on the toe, so the front of the foot works against less force.

Should radiographs be taken before changing a horse's shoeing?

Yes, where the vet advises it. Radiographs show the position of the pedal bone and any imbalance, which cannot be judged from the outside of the hoof.

Can a horse with a retracted sole stay barefoot?

Sometimes, with protection and good management while the sole grows back. It depends on how sore the foot is and should be agreed with the vet.

How often should a remedial horse be trimmed or reshod?

Often more frequently than a routine horse. In one case a barefoot horse that had gone five weeks was moved back to a three-weekly cycle.

Working with your vet

I work alongside the horse's own vet and farrier, not in place of them. See how I work with vets and other professionals, or how remedial work is quoted.

All case studies

General information from case notes, anonymised with the owner's consent. Horse names have been changed. It is not veterinary advice: diagnosis and treatment decisions stay with the horse's vet. Mark Humphrey AWCF, Master Farrier, Bunny Hill Farriery, Costock, Loughborough LE12 6XN. [email protected] or 07971 063407.